BorderLineSigs
New Member
- Messages
- 232
- Reaction score
- 0
- Points
- 0
I know when i started i looked FOREVER to find a good flash tutorial...I foudn one on a website and thought i'd share it (i configured it a bit) I used adobe flash CS3 I DON'T TAKE FULL CREDIT FOR THIS TUTORIAL, THE PICTURES ARE NOT MINE! LINK TO TUT IS http://www.flashfridge.com/tutorial.asp?ID=68
1) Create a new flash [COLOR=#000000! important][FONT=Tahoma, sans-serif][COLOR=#000000! important][FONT=Tahoma, sans-serif]document [/FONT][/FONT][/COLOR][/COLOR]. Press Ctrl+J key on the keyboard (Document Properties) and set your dimensions as whatever you like. Select any [COLOR=#000000! important][FONT=Tahoma, sans-serif][COLOR=#000000! important][FONT=Tahoma, sans-serif]color[/FONT][/FONT][/COLOR][/COLOR] as background color.Set your Flash movie's frame rate to 26 and click ok.
2)Take the [COLOR=#000000! important][FONT=Tahoma, sans-serif][COLOR=#000000! important][FONT=Tahoma, sans-serif]Text [/FONT][COLOR=#000000! important][FONT=Tahoma, sans-serif]Tool[/FONT][/COLOR][/FONT][/COLOR][/COLOR] (A) and type any text on the stage. For this example I have typed flashfridge.com. For this example I have used Tahom [COLOR=#000000! important][FONT=Tahoma, sans-serif][COLOR=#000000! important][FONT=Tahoma, sans-serif]font[/FONT][/FONT][/COLOR][/COLOR] size 28px and I have bold it. See the picture below.
3)While the text is still selected, press Ctrl+B key (Break Apart) to break apart this text. See the picture below.
4)While the text is still selected, choose Modify - Timeline - Distribute to Layers (Ctrl+Shift+D). Now, you have placed every letter in separated layer. See the picture below.
5)After that, select layer text and delete it, becouse it is unneedless for now.
6)Select now the first letter (in my example letter F) and press F8 key (Convert to Symbol) to convert this letter into a [COLOR=#000000! important][FONT=Tahoma, sans-serif][COLOR=#000000! important][FONT=Tahoma, sans-serif]Movie [/FONT][COLOR=#000000! important][FONT=Tahoma, sans-serif]Clip[/FONT][/COLOR][/FONT][/COLOR][/COLOR] Symbol.
Do that now, for every other letters.
7) Click on frame 5 and 10 of layer of the first letter (in my example letter "F") and press F6 key. After that, go back on frame 5 and move this letter a little up using the arrows key, or by mouse.
8) Choose right-click anywhere on the gray area between the frame 1 and 5 and frame 5 and 10 on the timeline and choose Create Motion Tween from the menu that appears.See the picture below.
9) Click on frame 5, 10 and 15 of layer of the second letter and press F6 key.
10) After that, go back on frame 10 and move the second letter a little up like we have done for the first letter using the arrows key or by mouse.
11) Choose right-click anywhere on the gray area between the frame 5 and 10 and frame 10 and 15 on the timeline and choose Create Motion Tween from the menu that appears.See the picture below.
12)Go back on frame 15 of layer of the first letter and press F5 key.
Now, we're done for the first two letters. Repeat this process also for every other letters. When you came to the end, repeat the all process again, but for this time do that from the left to the right side.
1) Create a new flash [COLOR=#000000! important][FONT=Tahoma, sans-serif][COLOR=#000000! important][FONT=Tahoma, sans-serif]document [/FONT][/FONT][/COLOR][/COLOR]. Press Ctrl+J key on the keyboard (Document Properties) and set your dimensions as whatever you like. Select any [COLOR=#000000! important][FONT=Tahoma, sans-serif][COLOR=#000000! important][FONT=Tahoma, sans-serif]color[/FONT][/FONT][/COLOR][/COLOR] as background color.Set your Flash movie's frame rate to 26 and click ok.
2)Take the [COLOR=#000000! important][FONT=Tahoma, sans-serif][COLOR=#000000! important][FONT=Tahoma, sans-serif]Text [/FONT][COLOR=#000000! important][FONT=Tahoma, sans-serif]Tool[/FONT][/COLOR][/FONT][/COLOR][/COLOR] (A) and type any text on the stage. For this example I have typed flashfridge.com. For this example I have used Tahom [COLOR=#000000! important][FONT=Tahoma, sans-serif][COLOR=#000000! important][FONT=Tahoma, sans-serif]font[/FONT][/FONT][/COLOR][/COLOR] size 28px and I have bold it. See the picture below.
3)While the text is still selected, press Ctrl+B key (Break Apart) to break apart this text. See the picture below.
4)While the text is still selected, choose Modify - Timeline - Distribute to Layers (Ctrl+Shift+D). Now, you have placed every letter in separated layer. See the picture below.
5)After that, select layer text and delete it, becouse it is unneedless for now.
6)Select now the first letter (in my example letter F) and press F8 key (Convert to Symbol) to convert this letter into a [COLOR=#000000! important][FONT=Tahoma, sans-serif][COLOR=#000000! important][FONT=Tahoma, sans-serif]Movie [/FONT][COLOR=#000000! important][FONT=Tahoma, sans-serif]Clip[/FONT][/COLOR][/FONT][/COLOR][/COLOR] Symbol.
Do that now, for every other letters.
7) Click on frame 5 and 10 of layer of the first letter (in my example letter "F") and press F6 key. After that, go back on frame 5 and move this letter a little up using the arrows key, or by mouse.
8) Choose right-click anywhere on the gray area between the frame 1 and 5 and frame 5 and 10 on the timeline and choose Create Motion Tween from the menu that appears.See the picture below.
9) Click on frame 5, 10 and 15 of layer of the second letter and press F6 key.
10) After that, go back on frame 10 and move the second letter a little up like we have done for the first letter using the arrows key or by mouse.
11) Choose right-click anywhere on the gray area between the frame 5 and 10 and frame 10 and 15 on the timeline and choose Create Motion Tween from the menu that appears.See the picture below.
12)Go back on frame 15 of layer of the first letter and press F5 key.
Now, we're done for the first two letters. Repeat this process also for every other letters. When you came to the end, repeat the all process again, but for this time do that from the left to the right side.
IF THIS HELPED YOU PLEASE GIVE ME REP+ THANKS