printer issue

Status
Not open for further replies.

Spartan Erik

Retired
Messages
6,764
Reaction score
0
Points
0
well i'm using an epson cx3200 printer, and my black ink cartridge ran dry
i just refilled it, and now the printer says its still empty

any solutions?

(note: i dont use name brand cartridges either, ive been using 3rd party cartridges from ebay for years now, and they work fine!)
 
N

Nathan

Guest
I just buy a new printer whenever I run out of ink. It's generally cheaper to buy a new printer then new ink.
 

bigguy

Retired
Messages
10,984
Reaction score
10
Points
38
Did you make sure the contact between the cartridge and the printer was clean. Are you sure you have it firmly in place.
 

Cynical

Active Member
Messages
3,492
Reaction score
0
Points
36
Dewayne said:
I just buy a new printer whenever I run out of ink. It's generally cheaper to buy a new printer then new ink.
Are you serious?? I have an Epson RX600 which was several hundred bucks ... to refil ink was I think $12.
 
N

Nathan

Guest
Cynical said:
Are you serious?? I have an Epson RX600 which was several hundred bucks ... to refil ink was I think $12.

I usually buy the crappy Lexmark or HP printers that's about $50 each and the ink costs $60-$75 each.
 

Spartan Erik

Retired
Messages
6,764
Reaction score
0
Points
0
Dewayne said:
I usually buy the crappy Lexmark or HP printers that's about $50 each and the ink costs $60-$75 each.

lol, which is why i never buy name brand ink
for the cost of one epson cartridge i could get five from ebay
ah yes i <3 ebay

but still, my printer is being lame and wont read my refilled cartridge.. i might let it sit awhile just so the sponge in the cartridge can let the ink ooze to the bottom i guess..
 

Vietkid58

Member
Messages
450
Reaction score
0
Points
16
are you sure everything's in place correctly? my printer usually says w/e error i have if something isnt working....
 

Spartan Erik

Retired
Messages
6,764
Reaction score
0
Points
0
Vietkid58 said:
are you sure everything's in place correctly? my printer usually says w/e error i have if something isnt working....

yeah everything is in place, cartridges are inserted properly etc
if i inserted it improperly the printer would tell me..

ah whatever ill just replace the cartridge with some new ones i just bought off of ebay
go ahead and close the thread please
 
B

Brandon

Guest
Some printers, like newer Epson models, have a green chip on their ink cartridges which is visible by looking at your cartridge. They are often referred to as "Intellidge" cartridges. The chip keeps track of how often the cartridge is used and lets the computer know when the cartridge may be low or empty. As long as you reset the chip, refilling the cartridge with ink from a refill kit will not be a problem. A resetting tool can be used to reset the memory on the chip. This allows the printer to recognize the cartridge as being full which makes printing with a refilled cartridge possible.
 

Spartan Erik

Retired
Messages
6,764
Reaction score
0
Points
0
Brandon said:
Some printers, like newer Epson models, have a green chip on their ink cartridges which is visible by looking at your cartridge. They are often referred to as "Intellidge" cartridges. The chip keeps track of how often the cartridge is used and lets the computer know when the cartridge may be low or empty. As long as you reset the chip, refilling the cartridge with ink from a refill kit will not be a problem. A resetting tool can be used to reset the memory on the chip. This allows the printer to recognize the cartridge as being full which makes printing with a refilled cartridge possible.

yeah the cartridges do have chips, and a resetter would be helpful
im thinking of purchasing a chip resetter off of ebay..
 

Derek

Community Support Force
Community Support
Messages
12,882
Reaction score
186
Points
63
yeah you should reset or checjk if its in place
 
Status
Not open for further replies.
Top