Wireless G vs. Wireless N

jtingram

New Member
Messages
1
Reaction score
0
Points
0
In my studies 802.11g outtakes 802.11n. Yeah n is a new technology but when connected the bandwidth fluctuates very rapidly.
 

Smith6612

I ate all of the x10Pizza
Community Support
Messages
6,517
Reaction score
48
Points
48
Don't forget though, Wireless N is still in it's "draft" stage, where they can change anything at any time. The improvments of Wireless N over Wireless G is the Range it can get (certainly a lot farter than my Linksys WRT54GX will possibly ever be able to transmit) and of course the speed (hearing 300Mbps roughly). Not to mention, N does use the less cluttered 5.2(?)Ghz range and can do 2.4GHz, so there's more channels for you to use as well which means more speed and less dead zones being caused by neighboring routers. Yeah, the routers may be expensive, but if you torture it enough by shoving high bandwidth apps and huge internet pipes at them, along with Torrents and Steam, they can do wonders (because of their CPU power, RAM for NAT, and the WAN to LAN/WLAN throughput they are capable of handling). Take Verizon FiOS for example. That is a consumer (and business) grade fiber optic product, where unless you have one of the speeds lower than 20Mbps/20Mbps, you won't find any cheap router that will be able to handle the throughput. Their top speed is 50Mbps/20Mbps, and already they're toying with 100Mbps and even 200Mbps speeds on the download. Now that NEEDS a big router or a PC with Linux to do the work. Unless of course you want to buy a very expensive Cisco ;)

Your speed fluctuations might be being caused by Wireless G/B devices connecting. When this happens, since those cards cannot do 300Mbps rates, the router compensates for that by slowing down the overall wireless speed. Newer Wireless N routers, however, come with two or more radios. One radio is for Wireless N exclusively, while the other radio is there to support Wireless G/B devices without slowing down the N band.
 
Last edited:

GG-Xtreme

New Member
Messages
430
Reaction score
0
Points
0
It depends. The full N coming in 2009 might be better, but right now, I just stick with SRX 400 (MIMO 802.11g). I get a full signal two blocks away and 240Mb/s LAN speed.
 

masteraa

New Member
Messages
56
Reaction score
0
Points
0
Wireless g is built into so many things, switching from wirless g to wirless n is like changing the shape of the eathernet port.

IM all for new technologies, but i think its WRONG to have bestbuy eomployies pushing people to buy wirless n because its better, when its still in draft.

Yea my grandma got a $120 wirless n router because the bestbuy guy said it would make her internet faster.... Geez, she has 10 mbps cable, a wirless g routher is just fine thank you very much! (we returned the router and i had a talk with the guy)
 

Smith6612

I ate all of the x10Pizza
Community Support
Messages
6,517
Reaction score
48
Points
48
If the cable connection is running at full speed and at it's best possible latency, the only way to speed it up is by adjusting the RWIN and MTU in Windows.
 

masteraa

New Member
Messages
56
Reaction score
0
Points
0
If the cable connection is running at full speed and at it's best possible latency, the only way to speed it up is by adjusting the RWIN and MTU in Windows.


yea tell the best buy dude that...
 

Smith6612

I ate all of the x10Pizza
Community Support
Messages
6,517
Reaction score
48
Points
48
Actually I probably won't. They have The Geek Squad there so I assume they should know that lol.
 
Top