trouble with "ftp configuration" and filezilla

[selcane]

Hello,
I'm trying to ftp my files using filezilla but it fails due to "connection closed by server" (actually, the files did transfer, but only half the size!)
now when i downloaded the "ftp configuration" and ran it, it successfully entered the info in the regstry, but the last step was not sucessful (Step 7: Open Filezilla and go to File > Site Manager. You should see your cPanel FTP listed. Click on it and connect using your password.) so i entered the information manually, i wonder if that has anything to do with why my ftp isn't working. Below is a copy of the ftp exchange...any tips would be greatly appreciated it! also, should i be ftping my files to public_html or www??? since they appear in both places... thanks... selcane

Status: Resolving address of ftp.theneesaproject.x10hosting.com
Status: Connecting to 216.245.208.154:21...
Status: Connection established, waiting for welcome message...
Response: 220---------- Welcome to Pure-FTPd [TLS] ----------
Response: 220-You are user number 7 of 75 allowed.
Response: 220-Local time is now 09:19. Server port: 21.
Response: 220-This is a private system - No anonymous login
Response: 220-IPv6 connections are also welcome on this server.
Response: 220 You will be disconnected after 15 minutes of inactivity.
Command: USER widad
Response: 331 User widad OK. Password required
Command: PASS ********
Response: 230-User widad has group access to: widad
Response: 230 OK. Current restricted directory is /
Command: SYST
Response: 215 UNIX Type: L8
Command: FEAT
Response: 211-Extensions supported:
Response: EPRT
Response: IDLE
Response: MDTM
Response: SIZE
Response: REST STREAM
Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
Response: MLSD
Response: ESTP
Response: PASV
Response: EPSV
Response: SPSV
Response: ESTA
Response: AUTH TLS
Response: PBSZ
Response: PROT
Response: 211 End.
Status: Connected
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/" is your current location
Command: TYPE I
Response: 200 TYPE is now 8-bit binary
Command: PASV
Response: 227 Entering Passive Mode (216,245,208,154,14,0)
Command: LIST
Response: 150 Accepted data connection
Response: 226-ASCII
Response: 226-Options: -a -l
Response: 226 23 matches total
Status: Calculating timezone offset of server...
Command: MDTM .bash_logout
Response: 213 20081122232402
Status: Timezone offsets: Server: -21600 seconds. Local: 0 seconds. Difference: 21600 seconds.
Status: Directory listing successful
Status: Retrieving directory listing...
Command: CWD public_html
Response: 250 OK. Current directory is /public_html
Command: PWD
Response: 257 "/public_html" is your current location
Command: PASV
Response: 227 Entering Passive Mode (216,245,208,154,12,204)
Command: LIST
Response: 150 Accepted data connection
Response: 226-ASCII
Response: 226-Options: -a -l
Response: 226 41 matches total
Status: Directory listing successful
Status: Resolving address of ftp.theneesaproject.x10hosting.com
Status: Connecting to 216.245.208.154:21...
Status: Connection established, waiting for welcome message...
Response: 220---------- Welcome to Pure-FTPd [TLS] ----------
Response: 220-You are user number 8 of 75 allowed.
Response: 220-Local time is now 09:20. Server port: 21.
Response: 220-This is a private system - No anonymous login
Response: 220-IPv6 connections are also welcome on this server.
Response: 220 You will be disconnected after 15 minutes of inactivity.
Command: USER widad
Response: 331 User widad OK. Password required
Command: PASS ********
Response: 230-User widad has group access to: widad
Response: 230 OK. Current restricted directory is /
Status: Connected
Status: Starting upload of C:\Users\Currie\Documents\neesa website\snowflakes\snowflakes\snowflakes\default2.css
Command: CWD /public_html
Response: 250 OK. Current directory is /public_html
Command: PWD
Response: 257 "/public_html" is your current location
Command: TYPE A
Response: 200 TYPE is now ASCII
Command: PASV
Response: 227 Entering Passive Mode (216,245,208,154,14,151)
Command: STOR default2.css
Response: 150 Accepted data connection
Error: Connection closed by server
Status: Resolving address of ftp.theneesaproject.x10hosting.com
Status: Connecting to 216.245.208.154:21...
Status: Connection established, waiting for welcome message...
Response: 220---------- Welcome to Pure-FTPd [TLS] ----------
Response: 220-You are user number 8 of 75 allowed.
Response: 220-Local time is now 09:20. Server port: 21.
Response: 220-This is a private system - No anonymous login
Response: 220-IPv6 connections are also welcome on this server.
Response: 220 You will be disconnected after 15 minutes of inactivity.
Command: USER widad
Response: 331 User widad OK. Password required
Command: PASS ********
Response: 230-User widad has group access to: widad
Response: 230 OK. Current restricted directory is /
Status: Connected
Status: Starting upload of C:\Users\Currie\Documents\neesa website\snowflakes\snowflakes\snowflakes\default2.css
Command: CWD /public_html
Response: 250 OK. Current directory is /public_html
Status: Retrieving directory listing...
Command: TYPE I
Response: 200 TYPE is now 8-bit binary
Command: PASV
Response: 227 Entering Passive Mode (216,245,208,154,132,91)
Command: LIST
Response: 150 Accepted data connection
Response: 226-ASCII
Response: 226-Options: -a -l
Response: 226 41 matches total
Command: TYPE A
Response: 200 TYPE is now ASCII
Command: PASV
Response: 227 Entering Passive Mode (216,245,208,154,225,207)
Command: STOR default2.css
Response: 150 Accepted data connection
Error: Connection closed by server
Status: Resolving address of ftp.theneesaproject.x10hosting.com
Status: Connecting to 216.245.208.154:21...
Status: Connection established, waiting for welcome message...
Response: 220---------- Welcome to Pure-FTPd [TLS] ----------
Response: 220-You are user number 8 of 75 allowed.
Response: 220-Local time is now 09:20. Server port: 21.
Response: 220-This is a private system - No anonymous login
Response: 220-IPv6 connections are also welcome on this server.
Response: 220 You will be disconnected after 15 minutes of inactivity.
Command: USER widad
Response: 331 User widad OK. Password required
Command: PASS ********
Response: 230-User widad has group access to: widad
Response: 230 OK. Current restricted directory is /
Status: Connected
Status: Starting upload of C:\Users\Currie\Documents\neesa website\snowflakes\snowflakes\snowflakes\default2.css
Command: CWD /public_html
Response: 250 OK. Current directory is /public_html
Status: Retrieving directory listing...
Command: TYPE I
Response: 200 TYPE is now 8-bit binary
Command: PASV
Response: 227 Entering Passive Mode (216,245,208,154,19,227)
Command: LIST
Response: 150 Accepted data connection
Response: 226-ASCII
Response: 226-Options: -a -l
Response: 226 41 matches total
Command: TYPE A
Response: 200 TYPE is now ASCII
Command: PASV
Response: 227 Entering Passive Mode (216,245,208,154,120,26)
Command: STOR default2.css
Response: 150 Accepted data connection
Error: Connection closed by server
Edit:

Hello,
I'm trying to ftp my files using filezilla but it fails due to "connection closed by server" (actually, the files did transfer, but only half the size!)...

i fixed my problem by downloading another ftp tool called core ftp le

filezilla was wierd, it was complaining files already existed when they didnt and transfereing the files partially and giving the connection closed by server error....

core ftp le is great!
Edit:
problem fixed wth core ftp le

 

[tttony]

Ok, but you must notify this problem to Filezilla team

 

[uplinked]

I use Filezilla and when I get the message connection closed, I can still access files and list directories whithout logging in again. It wakes up.

In some critical instances it closes the connection. What I am trying to say is that my connection is not always closed even though it sais so...

*Just a note*

 

[selcane]

ok, thanks, however, it did upload my files only partially...and try as a might, i couldnt make it work ... i guess it doesnt matter anymore,
thanks again

 

[uplinked]

No problem =)

Btw, any idea why my upload does not function? I posted the code in my thread...

 

[selcane]

i'm new to php, i'm working on my first ever website, and i dont know if i'm still thinking along the ftp lines since that is all that i have done, but maybe putting more debug code like the following would help?
if ($_FILES["upfile"]["error"] > 0)
{
echo "Error code is : " . $_FILES["upfile"]["error"] . "<br />";

}
else
{
echo "Upload: " . $_FILES["upfile"]["name"] . "<br />";
echo "Error code is : " . $_FILES["upfile"]["error"] . "<br />";
echo "Type: " . $_FILES["upfile"]["type"] . "<br />";
echo "Size: " . ($_FILES["upfile"]["size"] / 1024) . " Kb<br />";
echo "Stored in: " . $_FILES["upfile"]["tmp_name"];
}

anyway, what exactly are you imputing into that table? just the file name right? or are you inputing the actual file?

sorry if i'm wasting your time, as i am new to all of this!

 

[uplinked]

Thanks for your answers. =)

Check my thread for updates... I'd like to keep it all in one place just in case I get another opinion.