FTP problems

Status
Not open for further replies.

ViperBlade

New Member
Messages
186
Reaction score
0
Points
0
For some reason I can't access my FTP (ftp.vbgm.x10hosting.com) from either my house, or my brother's, however I CAN access it from college.

Any suggestions to a resolution?

Many thanks,
ViperBlade
 

Christopher

Retired
Messages
14,659
Reaction score
8
Points
0
Try connecting using stoli.x10hosting.com as the server.
Make sure you are not using multiple connections.
 

ViperBlade

New Member
Messages
186
Reaction score
0
Points
0
[20:11:37] SmartFTP v3.0.1019.8
[20:11:38] Connect failed. Waiting to retry (30s).

I get that when I attempt connecting to vbgm.x10hosting.com AND stoli.x10hosting.com
 

tnl2k7

Banned
Messages
3,131
Reaction score
0
Points
0
Sounds as though you may have been IP banned by the firewall. I'd advise you to wait 24 hours and then try again. If it's still not working we'll have to look into this a bit more closely, because FTP is online as far as I can tell.

-Luke.
 

ViperBlade

New Member
Messages
186
Reaction score
0
Points
0
It's been like this for about three weeks.
I don't think an additional 24 hours will make any difference.
 

Corey

I Break Things
Staff member
Messages
34,553
Reaction score
204
Points
63
Are you able to access the sites or are you blocked from all access to it?

Can you try putting in the IP address also instead of a host name?
 

ViperBlade

New Member
Messages
186
Reaction score
0
Points
0
I can access the site fine, it's just FTP that's inaccessible. I'll try the IP thing now, then post back.
Edit:
Yup. Same thing happens (no FTP access).
 
Last edited:

Jarryd

Community Advocate
Community Support
Messages
5,534
Reaction score
43
Points
48
What FTP client are you using? If your FTP client has an option to connect using multiple connections, disable that. Also try setting your FTP client to passive mode and see if that works.
 

ViperBlade

New Member
Messages
186
Reaction score
0
Points
0
I've used SmartFTP version 3.0 AND windows explorer, with the same results.
I made sure multiple connections were disabled, and passive and non passive modes make no difference.
 
Last edited:
Status
Not open for further replies.
Top