Why my monitor not responding to my pc signals?

ChatIndia

Community Advocate
Community Support
Messages
1,408
Reaction score
30
Points
48
When i start my computer, my monitor indicator blinks in the same way as in the case when pc has not been started and monitor is powered on. Besides i don't hear any beep and the two leds in the front of my pc cabinet glow constantly for nearly 5-10 min and then they never flash.
 
Last edited:

bhupendra2895

New Member
Messages
554
Reaction score
20
Points
0
According to my experience with my TFT monitor these can be the possible causes:-
1)May be your VGA cable is damaged.
2)Sometimes if motherboard gets dead then display don't work too.
By looking at the description, it looks like you are using the CRT monitor.So above information may not work for you.

I am having the similar issue these days.My TFT monitor is dead and according to LG its power supply may be damaged.I don't know how much days they will take to repair it. :(.

I suggest you to check your monitor on somebody else's computer and if it still hangs then take it to authorized service center.
 

John Klyne

Community Advocate
Community Support
Messages
964
Reaction score
7
Points
18
Dont send to service center, might as well, buy a new one...but then I think it's your graphics cards not compatable with your monitor...?/motherboard.
 

ChatIndia

Community Advocate
Community Support
Messages
1,408
Reaction score
30
Points
48
Thanks for ur quick replies guys! This is my fave pc for doing experiments nd i don't think that i can afford to buy a new one for doing experiments with it.
One more thing to add, i can open my dvd writer drive. Does it mean that my MoBo is alright?
 
Last edited:

leafypiggy

Manager of Pens and Office Supplies
Staff member
Messages
3,819
Reaction score
163
Points
63
No, it means your electrical supply and DVD reader work.
 

Smith6612

I ate all of the x10Pizza
Community Support
Messages
6,517
Reaction score
48
Points
48
When i start my computer, my monitor indicator blinks in the same way as in the case when pc has not been started and monitor is powered on. Besides i don't hear any beep and the two leds in the front of my pc cabinet glow constantly for nearly 5-10 min and then they never flash.

Find an extra monitor that supports the type of connection your video card supports (HDMI, DVI, VGA or DisplayPort) and see if you can get video from the computer. If that does not work, the graphics card whether embedded or in a PCI/AGP/PCI-E is probably dead or not receiving power. Try the graphics card in another PC capable of powering it up and see if you can get video if that is the case.
 

gururise69

New Member
Messages
2
Reaction score
0
Points
0
Check the cable. check all power connections, and if everything looks good. Then replace the cable. If that still doesnt work, its probably your video card.
 

jerome990

New Member
Messages
13
Reaction score
0
Points
0
First of all you have to Check the cable . check all power connections, and if everything looks good. Then replace the cable. If that still doesnt work, its probably your video card .
__________________________________________
Villas Spain
Lifting Slings
 
Top